Ngwunye Ngwunye Ọkụ Na-edozi Ahụhụ

Ngwunye Ngwunye Ngwunye Njikere na Ngwá Agha Ịgba Ogologo IGBT

Ebumnuche dermepụta wired ọla kọpa abụọ iji tinye turrets ndị ọzọ na ogwe osisi buss
Ihe Solder tinye ọla kọpa / nickel buss mmanya, 2 tinned tọrọ atọ ọla kọpa wires, brazing osisi
Okpomọkụ 446 ºF (230 ºC)
230 kHz ugboro ugboro
Akụrụngwa • DW-UHF-6kW sistemụ kpo oku, nke nwere isi ọrụ dịpụrụ adịpụ nke nwere otu 1.2μF capacitor.
• Ihe ọkụ ọkụ na-ekpo ọkụ nke e mere ma mepụtara kpọmkwem maka ngwa a.
Usoro A na-eji eriri igwe agbaji agbaji agbaji iji jikọta mgbakọ mmanya. A na-etinye wires ọla kọpa 2 na turrets ma tinye ike ya maka 30 sekọnd. A na-eji aka na-enye mkpanaka nkwado ahụ n'akụkụ akụkụ ahụ kpụ ọkụ n'ọnụ na braze na-aga kwa, na -emepụta njikọta ahụ.
Nsonaazụ / Uru Induction kpo oku na-enye:
• Na-ebelata oge nkwụsị
• Ọbụna nkesa nke kpo oku
• Nwekọ ọnụ iji kwado na-agbanwe agbanwe

 

ntinye nke nchikota igwe

Ngwunye Mgbakwunye Ntugharị Na Ncha

Ejiri ọla kọpa mee ihe na-eme ka ọla kọpa jiri ya na ngwá ọrụ IGBT dị elu

Ebumnuche Iji kpoo ọla na ọla kọpa maka ịgbado ọkụ na ngwa ọgwụ
Ihe Brass mgbanaka, ọla kọpa na ọla kọpa iberibe 5.11 ”(130mm) ogologo, 4.3” (110mm) OD & 0.3 ”(7mm) na thickest ebe na solder yiri mgbaaka
Okpomọkụ 392 ºF (200 ºC)
306 kHz ugboro ugboro
Akụrụngwa • DW-UHF-10 kW ntinye ọkụ ọkụ, nke nwere isi ọrụ dịpụrụ adịpụ nwere abụọ 0.33μF capacitors maka ngụkọta nke 0.66μF
• Ihe ọkụ ọkụ na-ekpo ọkụ nke e mere ma mepụtara kpọmkwem maka ngwa a.
Usoro A gwụchara usoro a na usoro abụọ na-eji eriri ntụgharị nke 3. Usoro izizi bụ ire mgbanaka ọla ahụ na ibe ọla kọpa nke na-ewe 85 sekọnd. Nzo ukwu nke abuo bu irecha ihe eji agba ocha na nke mbu. Usoro a na - ewe 50 sekọnd maka oge ngụkọta oge nke nkeji abụọ 15 sekọnd.
Nsonaazụ / Uru Induction kpo oku na-enye:
• kpo oku na-enweghị aka nke anaghị etinye aka na ọrụ ndị ọrụ maka n'ichepụta ihe
• Ọbụna nkesa nke kpo oku
• Oge ọsọ ọsọ, usoro ugbu a na - ewe minit 5
• Na-emegidesi ike site na iji mgbanaka akwa

 

mgbakwunye ọla na-eme ka ọla kọpa

 

 

 

 

 

 

 

 

A na-eji ọla kọpa mee ọla

 

 

 

 

 

 

 

 

akpụkpọ anụ na ọla kọpa

 

 

 

 

 

 

mgbakwunye ọla na ọla kọpa

Ejiri ọla kọpa na-emepụta ihe

Induction Soldering Copper Tap na Igwe Oru Okwu na IGBT Induction Heater

Ebumnuche Okpukpo ọla kọpa taabụ ruo mgbe ọkpụkpụ na-agbanye.
Ihe ọla kọpa taabụ 0.25 X 0.25 nke anụ ọhịa ahụ gbasara 0.05 sentimita asatọ. Duru free solder ihe onwunwe (elu agbaze okpomọkụ karịa mgbe solder.)
Okpomọkụ 500 ºF maka 1.25 sekọnd
286 kHz ugboro ugboro
Akụrụngwa DW-UHF-4.5 kW, 150-400 kHz siri ike usoro ntinye ọkụ na-arụ ọrụ nke nwere ọdụ ọkụ na-ekpo ọkụ nke nwere otu 1.2 μF capacitor na ngwa ọrụ ahaziri iche.
Igwe ihe ntụgharị dị iche iche dị iche iche dị ihe dịka 3/16 nke anụ ọhịa dị n'ime nke emere site na 1/16 inch tubing tubing.
Usoro Solder waya a nri na ọkà okwu taabụ ebe iji akpaka waya feeder. A na-emezi ka ọ dị ọkụ ka ọ na-agbanyeghachi solder.
Nsonaazụ / Uru Site na imepụta ihe eji arụ ọrụ ọkụ na-eme ka ọkụ rute ngwa ngwa achọrọ n'oge obere oge.

mgbakwunye ọla kọpa