Induction agha na-enwu brass ka steel Plate

Nnukwu ihe na-eme ka ọla kọpa na-arụ ọrụ na teknụzụ efere na-arụ ọrụ dị elu nke na-eme ka ihe dị elu DW-UHF-6KW-I na-etinye aka na-eme ka ihe ọkụkụ na-ekpo ọkụ Ihe dị iche iche na-eji ọla kọpa rụọ ọrụ na-eji Harris Stay-Brite # 8 Silver Bearing Solder and Harris Bridgit Na-ebute Free Soldering Flux. Igodo Key Ike: 2kW Okpomọkụ: 535 ° F ka 585 ° F (279 ° C… GỤKWUO

igba mkpị maka tubes ọla kọpa ka ọla kọpa

Nnukwu ihe ọkụkụ na-agbaze tubing ọla kọpa na ọla kọpa : 25 sekọnd Coil: Ejiri mkpuchi mee omenala. Usoro: E wetara arịrịọ ngwa a na ụlọ ọrụ HVAC itinye uche na HLQ Induction Heating Power's ntị. Ha… GỤKWUO

Njikọ Brass Ntughari Ntughari

Njikọ Brass na-agba ume na nkwụnye aka na oghere nke anyanwụ na IGBT na-eme ihe nkiri

Ebumnuche Solder njikọ ihe ọla kọpa atọ n'otu n'otu na igbe ntanetị nke oghere na-enweghị emetụta ihe ndị mejupụtara na igbe nkwụsị
Ihe ihe ngbachi oghere nke anyanwụ, njikọta ọla, eriri igwe
Okpomọkụ 700 ºF (371 ºC)
344 kHz ugboro ugboro
Akụrụngwa • DW-UHF-6 kW ntinye ọkụ ọkụ, nke nwere isi ọrụ dịpụrụ adịpụ nke nwere otu 1.0 μF capacitor.
• Ihe ọkụ ọkụ na-ekpo ọkụ nke e mere ma mepụtara kpọmkwem maka ngwa a.
Usoro A na-eji eriri agba anọ dị iche iche nke oval iji kpoo ndị njikọ ahụ ọkụ. A mpempe solder waya etinye na nkwonkwo ebe na onye ọ bụla na nkwonkwo na-ewe iwe dị iche iche maka 5 sekọnd na solder njikọ. Oge ngụkọta oge bụ sekọnd 15 maka nkwonkwo atọ ahụ.
Nsonaazụ / Uru Induction kpo oku na-enye:
• Nkọwa ziri ezi na-enye ọkụ naanị nkwonkwo; anaghị emetụta akụrụngwa ndị gbara ya gburugburu
• Mmiri a chọtara na-emepụta ihe dị ọcha ma dị ọcha
• Nweta ogo dị elu, nsonaazụ ndị ọzọ
• Ọbụna nkesa nke kpo oku

ọla mara mma

 

 

 

 

 

 

 

rf soldering ọla njikọ

 

 

 

 

 

 

 

Mgbakwunye ọla na-emepụta ihe

Ngwunye Mgbakwunye Ntugharị Na Ncha

Ejiri ọla kọpa mee ihe na-eme ka ọla kọpa jiri ya na ngwá ọrụ IGBT dị elu

Ebumnuche Iji kpoo ọla na ọla kọpa maka ịgbado ọkụ na ngwa ọgwụ
Ihe Brass mgbanaka, ọla kọpa na ọla kọpa iberibe 5.11 ”(130mm) ogologo, 4.3” (110mm) OD & 0.3 ”(7mm) na thickest ebe na solder yiri mgbaaka
Okpomọkụ 392 ºF (200 ºC)
306 kHz ugboro ugboro
Akụrụngwa • DW-UHF-10 kW ntinye ọkụ ọkụ, nke nwere isi ọrụ dịpụrụ adịpụ nwere abụọ 0.33μF capacitors maka ngụkọta nke 0.66μF
• Ihe ọkụ ọkụ na-ekpo ọkụ nke e mere ma mepụtara kpọmkwem maka ngwa a.
Usoro A gwụchara usoro a na usoro abụọ na-eji eriri ntụgharị nke 3. Usoro izizi bụ ire mgbanaka ọla ahụ na ibe ọla kọpa nke na-ewe 85 sekọnd. Nzo ukwu nke abuo bu irecha ihe eji agba ocha na nke mbu. Usoro a na - ewe 50 sekọnd maka oge ngụkọta oge nke nkeji abụọ 15 sekọnd.
Nsonaazụ / Uru Induction kpo oku na-enye:
• kpo oku na-enweghị aka nke anaghị etinye aka na ọrụ ndị ọrụ maka n'ichepụta ihe
• Ọbụna nkesa nke kpo oku
• Oge ọsọ ọsọ, usoro ugbu a na - ewe minit 5
• Na-emegidesi ike site na iji mgbanaka akwa

 

mgbakwunye ọla na-eme ka ọla kọpa

 

 

 

 

 

 

 

 

A na-eji ọla kọpa mee ọla

 

 

 

 

 

 

 

 

akpụkpọ anụ na ọla kọpa

 

 

 

 

 

 

mgbakwunye ọla na ọla kọpa

Ngwunye Mgbakwunye Brass Egwuregwu Brass

Nkume Ntughari Akpụkpọ ụkwụ Brass Egwuregwu Na-ekpo ọkụ nke Ngwá Ọrụ Ngwá Ọrụ Ngwá Ọrụ 

Ebumnuche Iji mee ka akpụkpọ ụkwụ na-eme ka usoro ọla kọpa rụọ
Ngwongwo Preassembled okpomọkụ Exchanger na ọla kọpa akpa na 2 ọla ọgwụgwụ okpu 2.36 "(60mm) OD, 0.08" ka 0.12 "(2 ka 3mm) oké na ma nsọtụ, mmiri mmiri solder
Okpomọkụ 302ºF (150ºC)
482ºF (250ºC)
237kHz ugboro ugboro
Akụrụngwa • DW-UHF-20kW sistemụ kpo oku, kwadebere ya na isi ọrụ ya dịpụrụ adịpụ nwere otu ihe 1.0μF
• Ihe ọkụ ọkụ na-ekpo ọkụ nke e mere ma mepụtara kpọmkwem maka ngwa a.
Usoro A na-eji eriri okpukpu anọ nke pancake iji gbanye okpu ọla abụọ n'otu okirikiri. Liquid solder na-squirted na njedebe okpu ma na-ekpo ọkụ maka 2 sekọnd na 18ºF (302ºC) iji gbaa ọkụ ọkụ. Mgbe ahụ
a mụbaa okpomọkụ na 482ºF (250ºC) maka 15 sekọnd iji ree akụkụ ahụ.
Results
Igwe kpo oku na-enye:
• Ọbụna nkesa nke kpo oku
• E jiri ya tụnyere efere ọkụ, ọkụ ọkụ na-ekpo ọkụ na-enwe ike ikpo ọkụ n'akụkụ abụọ na 30 sekọnd vs. otu akụkụ na 60 sekọnd
• Nbawanye mmepụta
• Ọ dịghị nchọpụta na usoro nhazi ngwa ngwa

Mgbakwunye mmepụta ihe na-eme ka ọla kọpa kpo oku

 

 

 

 

 

 

nkwụsị nke ntinye nsị

 

 

 

 

 

 

 

 

 

akpụkpọ anụ akpụkpọ anụ

Ngwunye nke Brass Tube-Pipe

Ntughari na-emepụta tuberculosis na tuberculosis nke RF na-eme ka a na-agba ume

Ebumnuche: dermegharị akpa ọla ọla abụọ na-atụle 3/4 ″ na 1/4 ″ ọnụ maka iji dị ka antennas ekwentị. Ogologo tubes dị site na ụkwụ anọ (4) ruo ụkwụ iri na abụọ (12), a ga-erekwa ya n'akụkụ akụkụ axial. A ga - eji nkwonkwo 60/40 Tin Lead Solder na Kestor Rosin tapawa nkwonkwo ahụ.
Ihe: Brass Tubes enweghị 3/4 ″ na 1/4 ″ 60/40 Tin Lead Solder
Kestor Rosin Flux
Okpomọkụ: 3750F
Ngwa: Site na ojiji nke DW-UHF-40KW na-ewepụta ike nrụpụta nke ike ya na ụzọ ise pụrụ iche (5) tụgharịrị 12 ″ ogologo ọwa, e rụpụtara nsonaazụ ndị a:
3750 F ruru na solder na-aga mgbe oge kpo oku nke 35 sekọnd.
Emepụtara mmepụta nke 24 ″ kwa nkeji iji zuru oke.
A na-ahụ ihe na-eme ka a na-edozi ihe na-eme ka ọ bụrụ ihe ọkụkụ ma dị jụụ
Akụrụngwa: DW-UHF-40kW na-ewepụta ezigbo ike itinye ọkụ na-arụ ọrụ gụnyere otu (1) ọdụ ọkụ dịpụrụ adịpụ nke nwere ihe abụọ (2), yana ihe ntanetị pụrụ iche (5) nke sitere na 3/16, tubing tubing na tụọ 1 1 / 4 ″ site 12 ″.
Frequency: 385 kHz

ihe nkedo nke na-eme ka a na-agbanye ume

 

 

Ntughari nke Brass Assembly

Mbube nke Brass Assembly na-agba ume na Units Soldering Units

Ebumnuche: Iji kpoo ọkụ ọla na njedebe okpu na 4500F maka ịgbanwere n'ime 20 sekọnd. Ka ọ dị ugbu a, a na-eji ihe eji emepụta ihe na-emepụta ihe njikọta n'etiti isi na okpu. The ahịa na-arịọ a àgwà solder nkwonkwo na di ntakiri kpo oku nke bellows iji gbochie annealing na arụmọrụ weere. A ga-eji ihe eji edozi Solder, n'ụdị efere akwa, iji mezue ngwa a.
Ihe: Brass Bellows na-atụle 2 ″ na dayameta Solder Preform
Flux Free Free Cadmium
Okpomọkụ: 4500F
Ngwa: DW-UHF-20kW na-ewepụta ike ọrụ ike na-arụ ọrụ yana ụzọ pụrụ iche atọ (3) tụgharịrị ọnya okpukpu abụọ iji nweta nsonaazụ ndị a:
E weere 4500F ma mee ka mmiri na-agba ọsọ na 6.3 sekọnd.
A hụrụ nkwonkwo a na-ahụ maka nkwonkwo.
Akụrụngwa: DW-UHF-20kW na-ewepụta ezigbo ike itinye ọkụ n'ime ike ọkụ gụnyere otu (1) ọdụ ọkụ dịpụrụ adịpụ nke nwere otu (1) 1.2 μF capacitor, na atọ (3) pụrụ iche na-atụgharị ọnya okpukpu abụọ nwere ọnya dị n'ime 0.4 ″.
Frequency: 307 kHz

Brass Brass Induction

Ntughari na-emechi ọla edo

Nkwụnye aka nkwụnye mgbanaka ígwè na-agba agba agba agba IGBT

Ebumnuche: Iji kpoo 1 3/4 ″, 3 ″ na 6 ″ dayameta ọla nchara na mgbaaka ọla kọpa a kpụrụ akpụ na 3600 F maka ire ere n'ime atọ (3) na isii (6) sekọnd. Ugbu mmepụta na-emezu site na iji a soldering ígwè na mkpisi nri rosin cored solder. Usoro a na-ahapụ ire ere na-achọghị n'akụkụ akụkụ nke ihe na-amị amị ebe ebe mgbanaka na-akpọtụrụ. Onye ahịa ahụ ga-achọ ịhụ mmụba na mma nkwonkwo na-enweghị igbu oge.
Ihe: 303 Brass Slip Rings of 1 3/4 ″, 3 ″ and 6 ″ diameters. Sheathed Ọla kọpa Waya Assembly.
Resin Core Solder, 37% Pb, 63% Sn.
Okpomọkụ: 3750F
Ngwa: Site na ule nyocha ụlọ nyocha, DW-UHF-20kW na-ewepụta ezigbo ike itinye n'ọkwa ike yana ụzọ pụrụ iche anọ (4) tụgharịrị "ntị muff" ụdị eriri igwe mepụtara nsonaazụ ndị a:
Oge edere 3750 F dị ka edepụtara n'okpuru ebe a:
- 1 3/4 ″ na sekọnd 3
- 3 ″ na sekọnd 3-4
- 6 ″ na 5 sekọnd
A hụrụ ọhụụ na-eme ka mmiri na-eme ka ọ ghara ịdị ọcha.
A na-atụ aro nrụpụta nsogbu na-eme ka mmepụta ngwa ngwa.
Ejikọtara akụkụ dị iche iche site na ụzọ anọ pụrụ iche (4) na-agbanye "ntị muff".
Akụrụngwa: DW-UHF-20kW na-ewepụta ike itinye ọkụ na-arụ ọrụ siri ike gụnyere otu (1) ọdụ ọkụ dịpụrụ adịpụ nwere otu (1) 1.0 μFcapacitor, ntinye 4-20mA maka nkedo nkedo ngwa ngwa, na anọ (4) pụrụ iche "ntigbu ntị ”Ụdị eriri igwe.
Frequency: 265 kHz

ntinye mgbanaka ọla

Ngwunye ígwè na brass na-eme ihe nkiri

Ngwá ígwè na-arụ ọrụ na brass na ntanetị IGBT na-emegharị ihe

Ebumnuche Kpoo nzukọ nke obere njikọta ọla edo na ọla nchara.
Ihe Dị Nso. 1/8 "(3.2mm) ihe nkedo ọla edo, 1" (25.4mm) square x 1/4 "eriri ọla
Okpomọkụ 600 ° F (315.6ºC)
240 kHz ugboro ugboro
Akụrụngwa • DW-UHF-6kW ntinye ọkụ na-ekpo ọkụ nke nwere isi ọrụ dịpụrụ adịpụ.
• Ihe ọkụ ọkụ na-ekpo ọkụ nke e mere ma mepụtara kpọmkwem maka ngwa a.
Usoro A na-eji eriri agba anọ dị iche iche na-enye ọkụ ọkụ n'otu akụkụ. Solder tapawa na agbanwe na-etinyere na nkwonkwo ebe na ike na-etinyere maka 20 sekọnd na-solder akụkụ. Kwesịrị
ọ dị mkpa ịchọta ụbụrụ iji jide akụkụ dị iche iche.
Nsonaazụ / Uru Induction kpo oku na-enye:
• Ọsọ ọsọ, ebe a kpochapụrụ cha cha na mpaghara ụfọdụ
• Na-adị ọcha na nkwonkwo dị ọcha
• Nhazi na-enweghị ntụpọ

Ngwunye ígwè ntinye aka na ọla